Claas DOMINATOR 150 - Hydraulic System Control Unit (DOMINATOR 130 Lift Hydraulic System)

00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 107
7 Overview of controls
7.2 Cab / Operator's platform
67083
54974
7.2.3 Hydraulic system control unit
(DOMINATOR 130 lift hydraulic system)
Cutterbar height, reel height and ground speed can be
infinitely varied by means of control lever (H).
After changing the speed of the threshing drum, block
the drum speed gate by turning lock (Y) in order to pre-
vent accidental variation of drum speed.
After actuating the control unit, the hydraulic control
lever automatically returns to neutral from any position.
During road travel, the front attachment gate (1 / 2)
must be blocked with lock (X).
18 Foot brake pedals
19 Headlights switch
20 Switch, windscreen wiper
21 Ignition switch
22 Cutterbar height indicator
23 Cutterbar spring pressure indicator
24 Buzzer
Designation
3
19409
H
6
4
2
3
5
7
8
X
Y
1
A
M
Designation
1 Lower front attachment / feed rake conveyor
2 Raise front attachment / feed rake conveyor
3 Reduce ground speed
4 Increase ground speed
5 Lower reel
6 Raise reel
7 Reduce drum speed
8 Increase threshing drum speed
Danger!
Unexpected machine movements.
Death or serious injuries!
– During road travel, the front attachment
gate must be blocked.