Claas DOMINATOR 150 - 3 Cleaning the Auger Troughs

364 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
13 Maintenance
13.16 Grain delivery
67089
– Open the grain tank cover and fold it open to the
rear as far as possible.
– Remove guard (1).
– Adjust the grain elevator chain.
- Loosen bolt (1).
- Slacken off the nuts (3) on both sides.
- Unscrew guard (4) and check filler auger chain.
–
- Adjust nut (2) until the chain is tensioned.
- After tensioning, tighten bolt (1) and nut (2).
- If necessary, tension filler auger chain with the
block tensioner and tighten bolt.
- Fit guard (4) and ensure a tight seat.
- Tighten the nuts (3) on both sides.
- Close the flap.
– Fit guard (1).
– Remove additional safety precautions.
83208
13.16.3 Cleaning the auger troughs
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
154
29583
1
Danger!
Danger of falling!
Death or serious injuries!
– Arrange for additional safety precautions.
– Only enter areas protected by railings.
– Areas originally without railings must be
protected by additional railings.
155
29584
1
2
4
3
WARNING:
The maximum chain tension is exceeded.
Machine damage.
– Check filler auger chain tension.
– If necessary, slacken off filler auger chain
before tensioning the grain elevator
chain.
156
29583
1