200 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
11 Fieldwork
11.5 Feeder unit
67087
11.5 Feeder unit
82138
11.5.1 Reading the ground pressure
Sensor (1) shows the front attachment ground pres-
sure on gauge (B). The sensor on the right cylinder
cannot be adjusted.
– Lower the front attachment during threshing until
the pointer of gauge (B) is in the upper range at „9
– 10“. The skids should never have ground con-
tact. Raise / lower front attachment if required.
12
19599
13
19601
1
B
Note!
Uneconomic use of machine and of front
attachment.
High fuel consumption.
High wear on the front attachment.
– The further the pointer on gauge (B) falls
towards "0“, the higher the front attach-
ment ground pressure.
– Do not set the ground pressure unneces-
sarily high.
Raise the front attachment if required.
To Next Page
Loading...
