EasyManua.ls Logo

Claas DOMINATOR 150 - 23 Changing the Radiator Coolant; 24 Draining the Radiator Coolant

Claas DOMINATOR 150
390 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 297
13 Maintenance
13.5 Engine
67089
In exceptional cases when no anti-corrosion
agent/antifreeze is available and/or no frost protection
is required (tropical zones), an approved coolant addi-
tive without a frost protection requirement must be
used (see lubricants chart).
Ex works, the machine cooling system is filled with
anti-corrosion agent/antifreeze and water in order to
prevent damage caused by corrosion and frost.
The coolant consists of 50 % corrosion inhibiting anti-
freeze and 50 % water.
This ensures frost protection down to approx. -37 °C.
62703
13.5.23 Changing the radiator coolant
Drain the radiator coolant.
Top up radiator coolant.
86461
13.5.24 Draining the radiator coolant
Observe the general warnings at the beginning of
the "Maintenance" chapter.
Let diesel engine cool down.
Outside temperature -37°C approx. -45°C
Share of water 50 % 45 %
Share of anti-corrosion agent/antifreeze 50 % 55 % max.
43
4033
Warning!
Soiling of liquids / lubricants.
Machine damage
Use clean, low-lime and low-chlorine
water.
Use clean containers.
Warning!
Contact with hot liquids or machine parts.
Danger of burns
Wear suitable protective clothing.
Let liquids or machine parts cool down.
Comply with instructions.

Table of Contents

Related product manuals