EasyManua.ls Logo

Claas DOMINATOR 150 - Cleaning the Fuel Tank Filler Screen; Closing; Opening the Fuel System Shut-Off Tap

Claas DOMINATOR 150
390 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
282 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
13 Maintenance
13.5 Engine
67089
Use clean fuel.
Observe max. fuel tank capacity.
Clean fuel sieve if necessary.
Screw on the cap (1) and check that it is tight.
85746
13.5.8 Cleaning the fuel tank filler screen
The fuel tank has a sieve in the filler neck.
Observe the general warnings at the beginning of
the "Maintenance" chapter.
Unscrew cover (1).
Remove the sieve and clean.
Replace damaged sieve!
Install sieve.
Bolt on cover (1).
86176
13.5.9 Closing / opening the fuel system shut-
off tap
Observe the general warnings at the beginning of
the "Maintenance" chapter.
When opening the fuel system (changing or cleaning
the filter), always close the shut-off tap (1). Unneces-
sary escape of fuel is thus avoided. When work is
complete, open the shut-off tap (1) again.
Close shut-off tap (1).
- To do this, turn in the shut-off tap (1).
Open shut-off tap (1).
Environment!
Lubricants and fuels end up in the
environment.
Environmental pollution.
Lubricants and fuels must be collected
and stored in suitable containers and dis-
posed of in a way that is harmless to the
environment and in accordance with
existing anti-pollution regulations.
12
14571
1
13
29516
1
Environment!
Lubricants and fuels end up in the
environment.
Environmental pollution.
Lubricants and fuels must be collected
and stored in suitable containers and dis-
posed of in a way that is harmless to the
environment and in accordance with
existing anti-pollution regulations.

Table of Contents

Related product manuals