Claas DOMINATOR 150 - 4 Cleaning the Stepped Preparation Floors

00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 361
13 Maintenance
13.15 Cleaning unit
67089
– Open the side panel.
– Loosen clamp (4) and adjust plastic indicator rod
(3) so that the coloured ring points to the lowest
number of the indicator (2).
– Close the side panel.
82782
13.15.4 Cleaning the stepped preparation
floors
A heavily soiled preparation floor results in an uneven
flow of the crop to the sieves, causing overloading of
the sieves and resulting in grain losses. The stepped
preparation floor sections of the preparation floor can
be pulled out to the rear for cleaning work.
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
– Loosen the nuts at the brackets (1).
– Detach the bracket (1).
147
19635
2
3
4
148
19632
1
1