312 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
13 Maintenance
13.6 Chassis
67089
– Remove screw (1).
– Collect the used oil in a sufficiently large
container.
– Clean screw (1).
– Turn in screw (1).
– Repeat this procedure on the other side of the
machine.
86788
13.6.9 Topping up the final drive oil
DOMINATOR 130
– Park the machine on level ground.
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
Warning!
Contact with hot liquids or machine parts.
Danger of burns
– Wear suitable protective clothing.
– Let liquids or machine parts cool down.
– Comply with instructions.
Environment!
Lubricants and fuels end up in the
environment.
Environmental pollution.
– Lubricants and fuels must be collected
and stored in suitable containers and dis-
posed of in a way that is harmless to the
environment and in accordance with
existing anti-pollution regulations.
67
Right side
23393
1
Environment!
Lubricants and fuels end up in the
environment.
Environmental pollution.
– Lubricants and fuels must be collected
and stored in suitable containers and dis-
posed of in a way that is harmless to the
environment and in accordance with
existing anti-pollution regulations.
To Next Page