Claas DOMINATOR 150 - 32 Changing the Air Intake Hoses; 33 Retightening the Air Intake Tube Clamps

304 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
13 Maintenance
13.5 Engine
67089
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
– In case of severe dust, regularly check the
sieve (1) and clean only when the diesel engine is
stopped.
38812
13.5.32 Changing the air intake hoses
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
– Remove all air intake hoses and install new air
intake hoses.
Tightening torque for hose clamp with round pin, with
spring = 10 Nm
Tightening torque for hose clamp with worm thread =
7Nm
38817
13.5.33 Retightening the air intake tube
clamps
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
Caution!
Machine operation with soiled or damaged air
filter.
Engine damage.
– Replace air filter immediately when the
display of the on-board information sys-
tem shows the relevant warning.
– Replace damaged air filters immediately.
58
23485
1
Caution!
Improperly performed work on the machine or
the front attachment can lead to
malfunctioning.
Risk of machine damage
– Have adjustment and repairs performed
only by an authorised specialist
workshop.