306 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
13 Maintenance
13.6 Chassis
67089
13.6 Chassis
11114
13.6.1 Wheels / tyres
– Check if wheel nuts / wheel bolts are tightly seated
every time after fitting a wheel and after the speci-
fied maintenance interval or tighten them.
– Retighten the track adjustment elements in
accordance with the manufacturer's instructions
– The tyres must only be ballasted to the extent that
the specified tyre pressures can be
maintained.
– Keep oil and grease away from tyres.
– Check tyres for damage regularly on the inside as
well.
– Do not clean tyres by applying a steam cleaner
directly.
Warning!
If tyre pressures exceed the specified values,
the tyres may explode.
Danger of injury
– Never stand in the vicinity of the tyre
while it is being inflated. Always stand
clear!
– Regularly check the pressure of the tyres.
– The specified tyre pressure must be
respected.
To Next Page
Loading...
Need help?
General
