EasyManua.ls Logo

Claas DOMINATOR 150 - 15 Changing the Fuel Pre-Filter (Accessory)

Claas DOMINATOR 150
390 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 287
13 Maintenance
13.5 Engine
67089
As soon as the drain plug (2) has been loosened,
drain the accumulated amount of water and col-
lect it in a container.
Observe the general warnings at the beginning of
the "Maintenance" chapter.
Fill fuel tank.
Drain condensed water.
- Connect the hose to the bolt (2).
- Hold a suitable container for the condensation
collected in the sight glass (4) beneath the
hose.
- Loosen bolt (2).
- Collect escaping liquid in a suitable container.
- Tighten bolt (2).
Bleed fuel system.
86114
13.5.15 Changing the fuel pre-filter
(accessory)
The fuel pre-filter is accessible after opening the right-
hand side panel.
Observe the general warnings at the beginning of
the "Maintenance" chapter.
Environment!
Lubricants and fuels end up in the
environment.
Environmental pollution.
Lubricants and fuels must be collected
and stored in suitable containers and dis-
posed of in a way that is harmless to the
environment and in accordance with
existing anti-pollution regulations.
23
29517
1
2
4
Environment!
Lubricants and fuels end up in the
environment.
Environmental pollution.
Lubricants and fuels must be collected
and stored in suitable containers and dis-
posed of in a way that is harmless to the
environment and in accordance with
existing anti-pollution regulations.

Table of Contents

Related product manuals