Claas DOMINATOR 150 - 12 Removing Belt (R7); 13 Installing Belt (R7)

00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 331
13 Maintenance
13.8 Drive belts / drive chains
67089
87615
13.8.12 Removing belt (R7)
– Set fan speed to the highest value with
crank (1).
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
– Unscrew two bolts (4) from bracket (3).
– Tension the belt (R7) manually until the spring-
loaded variable-speed pulley (2) is fully spread.
– Remove belt (R7).
87616
13.8.13 Installing belt (R7)
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
Warning!
Pinch points during assembly work.
Bruises of limbs.
– Keep limbs out of the hazard area.
– Use suitable tools.
93
23404
94
23405
3
R7
4
4
1
2