Claas DOMINATOR 150 - Adjusting the Front Attachment Drop Rate (DOMINATOR 150)

176 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
10 Fieldwork settings
10.2 Feeder unit
67086
73190
10.2.4 Adjusting the front attachment drop
rate (DOMINATOR 150)
The drop rate of the front attachment can be adjusted
by turning the knurled screw (1) on the flow control
valve (2).
– The drop rate should be adjusted when the
hydraulic oil is at working temperature. The drop
rate is adjusted on the knurled screw (1) and
should be set so that the front attachment drops
from the top to the bottom in about 5 to 6 seconds.
6
25066
7
25065
1
2
2
Drop rate
Faster turn in the knurled screw
Slower turn out the knurled screw