00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 315
13 Maintenance
13.6 Chassis
67089
86775
13.6.12 Topping up oil in the drive axle
gearbox
– Park the machine on level ground.
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
– Unscrew bolt (1).
– Fill in new oil.
– Check oil level , top up if necessary.
– Remove dirt from bolt (1).
– Screw in bolt (1) with sealant.
Environment!
Lubricants and fuels end up in the
environment.
Environmental pollution.
– Lubricants and fuels must be collected
and stored in suitable containers and dis-
posed of in a way that is harmless to the
environment and in accordance with
existing anti-pollution regulations.
WARNING:
Use of unpermissible spare parts or
lubricants.
Machine damage or increased wear.
– Spare parts and lubricants must at least
comply with the technical standards
required by the manufacturer of the
implement!
– The use of genuine CLAAS spare parts
and lubricants is recommended.
Caution!
Machine operation with unpermitted or pol-
luted lubricants.
Machine damage.
– Ensure a clean environment.
– Use suitable and clean tools.
– Use permitted lubricants.
– Lubricants must be free of pollution.
71
23390
1
To Next Page
Loading...
