00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09 151
9 Driving and transportation
9.3 Chassis
67085
– Using the shift lever (4), adjust the machine to the
desired switch position.
80238
9.3.3 Ground speed control lever
(DOMINATOR 130)
The control lever of the control unit for the ground
speed function in gate (3 / 4) is referred to as the
ground speed control lever (1).
The ground speed control lever sets the speed within
the respective gears in an infinitely variable way. After
actuating the control unit, the control lever automati-
cally returns to neutral (N) from any position.
The respective gears must be engaged separately
before starting off. See Shifting gears.
Reducing the ground speed
– Move the ground speed control lever (1) from the
neutral position (N) towards (3), thus reducing the
ground speed within the selected gear.
27
19430
2
3
1
4
N
Gear Designation
N Neutral position
1 1st gear Fieldwork gear
2 2nd gear Fieldwork gear /
road gear
3 3rd gear Road gear
Note!
Shift lever locks during shifting.
Gear is difficult to engage.
– Set shift lever in neutral.
– Release foot brake pedals.
– Briefly actuate the ground speed control
lever with the engine running.
– Set ground speed control lever to neutral
while the engine is running.
– Depress the foot brake pedals
downwards.
– Set shift lever to desired shift position.
28
19409
1
4
3
N