310 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
13 Maintenance
13.6 Chassis
67089
– Remove screw (1).
– Collect the used oil in a sufficiently large
container.
– Clean screw (1).
– Turn in screw (1).
– Repeat this procedure on the other side of the
machine.
86782
13.6.6 Topping up the final drive oil
DOMINATOR 150 / 140
– Park the machine on level ground.
– Observe the general warnings at the beginning of
the "Maintenance" chapter.
64
23392
1
Environment!
Lubricants and fuels end up in the
environment.
Environmental pollution.
– Lubricants and fuels must be collected
and stored in suitable containers and dis-
posed of in a way that is harmless to the
environment and in accordance with
existing anti-pollution regulations.
WARNING:
Use of unpermissible spare parts or
lubricants.
Machine damage or increased wear.
– Spare parts and lubricants must at least
comply with the technical standards
required by the manufacturer of the
implement!
– The use of genuine CLAAS spare parts
and lubricants is recommended.
Caution!
Machine operation with unpermitted or pol-
luted lubricants.
Machine damage.
– Ensure a clean environment.
– Use suitable and clean tools.
– Use permitted lubricants.
– Lubricants must be free of pollution.
To Next Page
Loading...
