140 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
9 Driving and transportation
9.1 General Information
67085
– Shift machine to desired gear.
– Swing in unloading auger tube.
– Close grain tank cover.
– Move the front attachment to transport position
and prepare it for road travel.
– Raise / lower the feed rake conveyor (front attach-
ment) until the clearance between the bottom
edge of the feed rake conveyor and the ground is
500 mm.
– Switch off switch (1).
– Block the front attachment gate (1 / 2) with
lock (X).
– Adjust the diesel engine speed.
– Switch on the warning beacon.
– If necessary, switch on the drive lights.
– Switch off the work lights.
Danger!
Unexpected machine movements.
Death or serious injuries!
Machine damage.
– Adapt the ground speed to the field condi-
tions in areas with a slope.
– Never exceed the permitted ground
speed of 20 (25) km/h on surfaces with a
slope.
2
DOMINATOR 150 / 140
19415
1
Danger!
Unexpected machine movements.
Death or serious injuries!
– For road travel the road travel / fieldwork
switch must be OFF.
3
DOMINATOR 130
28327
2
X
1
Danger!
Unexpected machine movements.
Death or serious injuries!
– During road travel, the front attachment
gate must be blocked.
To Next Page