224 00 0293 210 2 - BA DOMINATOR 150/140/130 - 12/09
11 Fieldwork
11.9 Crop receptacle / straw receptacle
67087
– Lay belt (1) on the inner side of the elevator and
install it on pulley (8) via jockey pulley (4). To do
this, push down jockey pulley (4).
– Loosen turn locks (9) on both sides.
– Pull finger rake (10) from its lock, fold it down and
let it engage so that the rake makes contact with
the spreader.
– Lift the sheet metal plate (11) on the left side.
Raise the standard spreader until the plates
engage in the detents (B) on both sides.
– Bolt down turn locks (9) on both sides.
– Loosen turn locks (12) on both sides.
– Loosen turn lock (13) on the right side.
– Move the straw chopper to the rear, using
crank (14).
At the same time the straw guide plate (15) is
swung backwards.
54
19663
1
4
8
Warning!
Pinch points during assembly work.
Limbs may be bruised.
– Keep your limbs away from the hazard
area.
55
19670
9
10
56
28707
11
B
9
57
19664
14
13
12
12
15
To Next Page
Loading...
