CodaOctopus F180R - Page 117

Software
Copyright © 2015 Coda Octopus Products Ltd
117
F180R MOTION Sensor User and Reference Guide
Figure 98: Heading Initialisation Completed
The heading initialisation status is displayed at the top of the dialog. This can be one of the
following states:
Field
Description
In Progress
This state is displayed when the heading
initialisation sequence in underway.
Completed
This state is displayed when the heading
initialisation sequence has successfully
completed.
Not Connected
This state is displayed when MOTION Control
has no communication link to the F180R
System.
The speed of heading initialisation is dependant on the number of satellites visible, their
position in the sky and the presence of multipath. It is very unusual for a heading initialisation
to take more than 30 minutes and most initialisations will take less than 2 minutes.
The F180R System must be able to see at least 5 satellites throughout the initialisation
process; the more satellites the system can see, the quicker the initialisation is likely to be.