7-6 Using an Internal Modem
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Integrity Group Saved date: 06/01/00 3:44 PM
Part Number: 168894-001 File name: CH07.doc
Using Modem Commands and Dial Modifiers
You can configure most communications software without the use
of AT commands or dial modifiers.
■
If you prefer to configure the modem using AT commands,
❏
In Windows 95, Windows NT 4.0, or Windows 98,
select
Accessories
!
HyperTerminal.
❏
In Windows 2000 Professional
select Accessories
!
Communications
!
HyperTerminal.
■
Command sets for all modem models are available at the
Compaq website at http://www.compaq.com and on the
Compaq Portable Product Reference Library
CD-ROM
included with the computer. The command sets list and
describe AT commands, Status registers, and result codes.