3-4 Inserting, Removing, or Storing a Battery Pack
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 05/30/00 10:33 AM
Part Number: 168893-001 File name: CH03.doc
Inserting a Primary Battery Pack into the
Battery Bay
1. Close the display.
2. Tilt the computer up
1
.
3. With the smooth side of the battery pack facing up and the
battery cells facing in, lead the rounded edge of the battery
pack into the battery bay. Angle the battery pack into the bay
until it is fully seated
2
.
4. If the computer is in Hibernation, slide the power switch to
resume normal operation.
To Next Page
Loading...
Need help?
General