Inserting, Removing, or Storing a Battery Pack 3-5
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 05/30/00 10:33 AM
Part Number: 168893-001 File name: CH03.doc
Removing a MultiBay Battery Pack from the MultiBay
1. If a battery pack is your only power source, initiate
Hibernation.
2. With the MultiBay facing you, tilt the computer up
1
and
slide the MultiBay release latch toward the opening of the
bay
2
.
3. Grasp the edge of the battery pack at the notch under the
battery pack and pull it out of the MultiBay
3
.
To Next Page
Loading...
