9-4 Upgrading Memory
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 05/29/00 5:29 PM
Part Number: 168893-001 File name: CH09.doc
Inserting a Memory Expansion Board
All memory expansion boards supported by the computer
â–
Can be used in either of the two memory expansion slots.
â–
Are keyed (notched) to ensure correct positioning.
1. Slide the memory expansion board into an empty memory
expansion slot at a 45-degree angle
1
until it is seated.
2. Push the memory expansion board down until the retention
clips
2
snap into place.
Replacing the Keyboard
Line up the bottom edge of the keyboard and fold it back into
place
1
. Then snap the four tabs at the top of the keyboard
2
.