Inserting, Removing, or Storing a Battery Pack 3-3
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 05/30/00 10:33 AM
Part Number: 168893-001 File name: CH03.doc
Removing a Primary Battery Pack from the Battery Bay
1. If a battery pack is your only power source, initiate
Hibernation by pressing
Fn +
the suspend button.
NOTE:
If there is drive activity, Hibernation may not occur
instantly.
2. Close the display.
3. Tilt the computer up
1
and push the battery release latch
below the battery bay toward the fan
2
to release the battery
pack.
4. Remove the battery pack from the battery bay
3
.
To Next Page
Loading...
Need help?
General