Using Drives 5-7
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 05/31/00 10:00 AM
Part Number: 168893-001 File name: CH05.doc
Removing a Hard Drive Assembly from the MultiBay
1. Save your work, then shut down the computer.
2. Close the display.
3. With the MultiBay facing you, tilt the computer up
1
.
4. Slide the MultiBay release latch toward the opening of the
MultiBay
2
.
5.
Pull the hard drive assembly (the hard drive inserted into the
MultiBay hard drive adapter) out of the MultiBay by grasping
the notch on the bottom of the drive
3
.
To Next Page
Loading...
Need help?
General