Using an Internal Modem 7-3
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Integrity Group Saved date: 06/01/00 3:44 PM
Part Number: 168894-001 File name: CH07.doc
Setting Up the Modem
The following procedures are necessary only if your modem
name does not display at Start
!
Settings
!
Control Panel
!
Modem.
In Windows 95 or Windows 98
—Select Start
!
Settings
!
Control Panel
!
Modem. The Install New Modem setup wizard
displays. To set up the modem with this wizard:
1. On the first screen, select Other, then select the Next button.
2. On the second screen, select your modem model name or
select the Next button to prompt your operating system to
detect the modem.
3. Follow the instructions on the screen.
In Windows NT 4.0
—
1. Go to C:\Program Files\Compaq.
2. Select your modem model name.
3. Select Modem\NT40. Then,
â–
If your modem is a network model, select Combo folder\
Setup.exe.
â–
If your modem is not a network model, select Setup.exe.
In Windows 2000 Professional
—
1. Go to C:\Program Files\Compaq\CPQLANMODEM\Modem.
2. Double-click setup.exe.
To Next Page
Loading...
Need help?
General