Using Infrared Communication 12-1
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 05/30/00 7:04 PM
Pages: 3 Words: 624 Template: c:\template\ref\ref.dot
Part Number: 168894-001 File name: CH12.doc
chapter
12
U
SING
I
NFRARED
C
OMMUNICATION
Communicating with Infrared
■
If the computer is running Windows 98, Windows 2000
Professional, or a preinstalled Windows 95 operating system,
the computer is IrDA-compliant (4Mbps standard) and can
communicate with another infrared-equipped device that is
also IrDA-compliant.
■
Infrared communication
❏
Occurs through the infrared port illustrated below.
❏
Is not supported by Windows NT 4.0 without optional
software that is not available from Compaq.
NOTE:
The infrared port supports both low speed connections up to
115 kilobits per second (Kbps) and high speed connections up to
4 megabits per second (Mbps). Infrared performance may vary
depending on performance of infrared peripherals, distance
between infrared devices, and applications used.
To Next Page
Loading...
