10-4 Using Audio and Video Features
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Karen Williams Saved date: 05/29/00 5:31 PM
Part Number: 168893-001 File name: CH10.doc
Connecting an External Video Device
■
The composite video-out jack can support
—
❏
Any device, such as a television, VCR, camcorder,
overhead projector, or video capture card, that accepts
video-in through a standard composite video connector.
❏
Video signals only. If you are setting up a configuration
that combines audio and video functions, such as playing a
DVD movie to a television, connect the device audio to the
stereo/speaker headphone jack.
■
The computer can support
—One composite video device
connected to the video-out jack while simultaneously
supporting an image on the computer display and on any other
supported external displays.
Connecting a Device to the Composite Video-Out Jack
To transmit video signals through the composite video-out jack,
you need a standard composite video cable available from most
television, VCR, or electronics retailers.
To connect a video device to the composite video-out jack
—
Plug either end of the composite video cable into the composite
video-out jack on the computer. Then connect the other end of the
cable to the video device as instructed in the device
documentation.
To Next Page
Loading...
Need help?
General