2-6 Using the Keyboard
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Writer: Karen Williams Saved by: Integrity Group Saved date: 05/31/00 4:40 PM
Part Number: 168893-001 File name: CH02.doc
Switching the Display and Image (Fn+F4)
In Windows 95, Windows NT 4.0, or Windows 2000
Professional
—Toggle
Fn+F4
to switch the image among the
computer display, external display(s), and simultaneous display.
The external displays can be connected through the external
monitor connector or the composite video-out jack.
In Windows 98
—
■
When MultiMonitor is enabled, press
Fn+F4
to turn off an
external display connected to the external monitor connector
and disable MultiMonitor.
■
When MultiMonitor is disabled, toggle
Fn+F4
to switch the
image among the computer display, external display(s), and
simultaneous display. The external displays can be connected
through the external monitor connector or the composite
video-out jack.
Adjusting System Volume (Fn+F5)
■
To adjust system volume with an on-screen slide button or
with the keyboard arrow keys, press
Fn+F5.
■
To mute or restore volume
❏
Press
Fn+F5+M
or
❏
Press
Fn+F5,
then select or clear the Mute checkbox.
Initiating Quick Controls (Fn+F6)
Quick Controls security features disable the keyboard and
pointing device and clear the screen. Before you can use Quick
Controls, you must set a power-on password and enable Quick
Control preferences. For instructions, refer to Chapter 6.
■
To initiate Quick Controls manually, press
Fn+F6.
■
To exit Quick Controls, enter your power-on password.
The
Fn+F6
hotkeys cannot be used on an external keyboard
connected through a USB connector on the computer or an
optional docking base.
To Next Page
Loading...
Need help?
General