Compaq ProLiant 5500 - Page 116

7-9
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: H-CH07.DOC Last Saved On: 2/8/99 11:06 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
SCSI Input 0 Channel
The SCSI Input 0 channel connects to SCSI hard drive slots 0 through 6,
as shown in Figure 7-6.
00
11
22
33
44
55
66
2
5
4
7
8
1
3
6
Figure 7-6. SCSI input 0 channel
Table 7-2
SCSI Input 0 Channel Connectors
1
SCSI Port 1
5
SCSI Input 0
2
SCSI Port 2
6
SCSI hard drives
3
Peripheral board
7
Simplex board
4
System board
8
Removable media bay