4-9
Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: E-CH04.DOC Last Saved On: 2/12/99 12:18 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Accessing DIMM Sockets on the Memory
Board
1. Power down the server.
2. Remove the memory board as shown in Figure 4-7.
1
2
1
Figure 4-7. Removing the memory board
To Next Page
Loading...
