4-14
Installing Hardware Components
For use with Pentium II Xeon and Pentium III Xeon processor-based servers only
Writer: Michele Wray Project: Compaq ProLiant 5500 and 5500R Servers Setup and Installation Guide Comments: 328470-002
File Name: E-CH04.DOC Last Saved On: 2/12/99 12:18 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Peripheral Board Features
5 6 7 8 9 10
2
1
3
4
12a
13a
11 a
12b
13b
11b
Figure 4-12. Peripheral Board Features
Table 4-3
Peripheral Board Features
Identifier Description Identifier Description
1 Fan cable assembly connector 9 Integrated Management Display
connector
2 Power switch connector 10 Serial B connector
3 Internal battery 11a Parallel port connector
4 Internal battery jumper (use external
battery, if removed)
11b Wide Ultra External SCSI connector
5 System configuration switch 12a Serial A connector
6 External battery connector 12b Video connector
7 Wide Ultra SCSI Port 1 connector 13a Keyboard connector
8 Wide Ultra SCSI Port 2 connector 13b Mouse connector
To Next Page
Loading...
