LPOD Outdoor Amplifier / Block Up Converter Revision 9
Ethernet-based Remote Product Management MN-LPOD
4–30
Statistics Configuration
• Statistics Logging – Use the drop-down list to select either Enable or Disable to set the
Statistics Logging function.
• Statistics Interval – Enter the interval, in minutes, at which statistics are logged. Minimum
resolution is 1 minute (001); maximum is 99 minutes (099). Default is 90 minutes (090).
• Statistics Averaging – Use the drop-down list to select either Enable or Disable to set the
Statistics Averaging function:
o When Enabled, statistics data is averaged at a rate of once per second for 10 seconds.
o If Disabled, burst values will be logged instead of averaged values.
Click [Submit] once you have completely defined the statistics’ reporting parameters.
To Next Page
Loading...
