Conquest Imaging GE Voluson E10 - Patient I;O Module; User Console

GE Voluson E10 Training Manual
© 2017 Conquest Imaging
11
Patient I/O Module
The Patient I/O module allows ECG inputs to be used in conjunction
with patient studies. The scanned image that is displayed is
synchronized with the ECG and PCG traces. In Doppler or M-Mode,
the traces are synchronized to that particular mode’s sweep. The AUX
input is capable of handling external ECG signals from other
diagnostic ECG devices.
User Console
The Voluson E-Series control console or User Interface(UI) consists of
the following electronic sub-assemblies and/or functional
components:
Display/Touch screen module:
 WXGA display - 1280 x 800 pixels
 Integrated USB to converter with USB2.0 High Speed
Interface
 Projected capacitive touch screen
 Console module
Seven port USB 2.0 Hub controller:
 Contols (Encoder/Joycoder) with integrated rotary/push/flip
function
 USB Trackball (2”) with dedicated buttons to emulate
standard three button mouse
 USB standard alphanumeric keyboard
 USB extended keyboard with controller
 LED Indicators with wide range dimming
 LED to illuminate probe port connectors
DC/DC Converter:
Converts 12VDC input voltage to 5VDC and 3.3VDC output voltages
for UI components.
Inputs for the patient I/O
are not meant for patient
monitoring they are
meant for correlation with
patient scans only.