Conquest Imaging GE Voluson E10 - Device Setup

GE Voluson E10 Training Manual
© 2017 Conquest Imaging
31
Setup Instructions
3-62
Voluson E-Series Service Manual
5539550APB Revision 4
Available WLAN Channels
The available WLAN channels show availability of wireless connect
point that the system can talk to. Each channel supports a finite
number of users and has limited signal strength. This may effect the
ability to connect, the throughput and the connection dropping out.
1. Press the Utilities key on the control console.
2. On the right side of the screen select Connectivity and then click
the Device Setup tab.
3. Click the WLAN Configuration button; see Figure 3-52 on page 3-59
.
4. The Wireless Network Configuration tool with available Wireless
Networks appear.
5. Select the Properties tab.
Figure 3-57 Properties
6. Click Available Channels.
DICOM Device Setup
From the Device Setup screen it is possible to configure:
 DICOM
 Archive
 Network