GE Voluson E10 Training Manual
© 2017 Conquest Imaging
Viewpoint default Loads the default settings for Viewpoint.
Select one of the following Transfer Modes.
Network: Send the patient report to a PC report station via
DICOM network.
Serial: Send the patient report to a PC report station that is
connected by serial port. The optional “PRY USB-RS232
Connection kit” must be connected to the system.
When this Transfer Mode is selected, different fields are available:
COM Port, Flow control and Bits per second.
Note Private Tags only
work if the other system
also supports Private
Tags.
Note The bit rate (Bits per
second) must be the same
as on the receiving PC
report station.
To Next Page
Loading...