GE Voluson E10 Training Manual
© 2017 Conquest Imaging
If Send sequ. is not checked, up to 5 data sets can be
transferred at the same time. This means that transfer is
faster. Images can arrive out of order in this case.
Storage Commit - The Storage Commit drop down list contains all
currently added Storage Commit servers. The selected Storage
Commit server is used for committing the images sent to this store
server.
4D View default - Loads the default settings for 4D View®. The
destination information must be entered manually.
DICOM Station default - Loads the default settings for DICOM
Station. The destination information must be entered manually.
Viewpoint default - Loads the default settings for Viewpoint.
If the volume contains color information, the color part of the
volume is compressed with a setting that is 5 points better
than the selected setting, e.g. Setting Mid: color compression
High, grey compression Mid
If an image / multifram cine is compressed using lossy JPEG
compression, a yellow sign (Jxx; xx = compression factor, e.g.
JH) is added to the image (but not to secondary capture
images).
If a volume is compressed using lossy, a yellow sign (Wxx; xx =
compression factor, e.g. W9) is added when reloading the
image.
The Modality Performed Procedure Step MPPS allows you to select
the Store Server and the SR Server.
Only the images sent to the selected Store Server are added to the
image list of the MPPS completed (or discontinued) message.
Note When the MPPS server is created and selected, MPPS messages
are created when an exam is started or ended.
Add a Storage Commit Server. These servers can then be selected in
the drop down list of the STORE-, STORE3D- and STR.REPORT -
Service.
Use for servers that have
none of the limitations
listed in the above
paragraph.
Caution: A lossy
compression can reduce
image quality which can
lead to a false diagnosis!
To Next Page
Loading...