Conquest Imaging GE Voluson E10 - External USB-Devices

GE Voluson E10 Training Manual
© 2017 Conquest Imaging
41
 D: partition of internal hard disk
 DVD/CD+R/RW
 Mapped Network Drive.
 Any other drive connected to the system (e.g.; USB-Stick or
external hard disk drive).
Save Small Backup (Scan Settings)
The Image/Scan Settings contain:
 Application Settings
 2D Factory and 2D User Presets
 3D/4D Factory and 3D/4D User Presets
 Annotation Presets
 Scan Assistant Configuration
 Measure Configuration
 Biopsy Lines
To create a Small Backup:
 Insert a DVD/CD+R/RW into the drive or connect an external USB
device.
 Press the Utilities key on the control console.
 In the “Utilities” menu touch the Setup button to invoke the
setup desktop on the screen.
 On the right side of the screen select Backup and then click the
System Configuration tab.
 Click the Save button (1) of the "Small Backup (Scan Settings)"
group.