Conquest Imaging GE Voluson E10 - HIS;RIS Server Information

GE Voluson E10 Training Manual
© 2017 Conquest Imaging
75
Parameter
Description
communicate with the ultrasound system
To complete the DICOM Print Device Configuration you will also need
to gather the following information from the device vendor:
 The type of print device.
 The film sheet format (for the Film Sheet Formats option; only
required if the customer plans to use a format other than the
default format).
 The media it uses: blue film, clear film, or paper (for the Medium
type option).
 Whether the print device or a darkroom develops the film (for
the Film destination option).
HIS/RIS Server Information
Except for the HIS/RIS server logical names, obtain the information
listed below from the device vendor or the facility DICOM
administrator or IT group.
Parameter
Description
Host
Name
The host name of the HIS/RIS server.
TCP/IP
Address
The IP address of the HIS/RIS server.
Logical
Name
An arbitrary name that is required for the
configuration but does not display in the user
interface.
AE Title
The AET for the HIS/RIS server.
Port
The network port that the HIS/RIS server uses to
communicate with the ultrasound system.
The HIS/RIS vendor needs
to know the ultrasound
system AET, which
displays on the local AEs
configuration screen
under HIS/RIS.