GE Voluson E10 Training Manual
© 2017 Conquest Imaging
3. Click the [+] sign and copy the desired content by clicking the [>>]
button; and so on ....
4. Confirm selection with the Load button (3).
Settings will be loaded and the ultrasound system Application
Software will restart.
Backup Full System Configuration (Full Backup)
A backup of the Full System Configuration contains the following
data:
User Settings (databases and files containing User Programs,
2D/3D/4D Presets, gray curves etc.)
System Settings (general "Setup" settings such as Language,
Time/Date format, Button configuration, Annotation settings,
Biopsy lines, Peripheral data, Video Norm, Archive configuration,
etc.)
Measure Configuration (user specific measure setup settings)
Patient Archive (database containing patient demographic exam
data and measurements) - no images
V830 Settings (Options resp. Permanent Key that is specific for
enabled software options and Demo Key)
Image Transfer Configuration (DICOM configuration e.g., DICOM
servers, AE Title, Station Name, etc.)
Network Configuration (Network settings: IP address, Network
Profiles, e-mail configuration, network printer, network drives,
computer name)
Service Platform (state of the Service Software)
To perform a full backup:
1. Press the Utilities key on the control console.
2. In the “Utilities” menu touch the Setup button to invoke the setup
desktop on the screen.
Note To return selected
items from the “Load
Data” field to “Backup
Data” field select the [<<]
button
Note It is recommended to
“Full Backup” system
configuration data before
upgrading the software
and/or image settings
(presets). This ensures
that if settings need to be
reloaded, will be the same
ones the customer was
using prior to service.
To Next Page
Loading...