Control Techniques COMMANDER SE

24 Commander SE Advanced User Guide
Issue Number: 4
Indicates the reference currently being selected.
1 Analog reference 1 selected
2 Analog reference 2 selected
3 Preset reference selected
4 Keypad reference selected
5 Precision reference selected
Indicates the preset currently being selected. If 1.49 = 1 or 2 then a value of 1 indicates that one of the analog references is
being selected.
Selects the value of the keypad reference on power-up.
00keypad reference is zero
1LAStkeypad reference is the last used value
2PrS1keypad reference is copied from preset speed 1 (parameter 1.21)
1.48 Unused parameter
1.49 Reference selected indicator
Ú
1 ~ 5
Ö
RO Uni P
1.50 Preset selected indicator
Ú
1 ~ 8
Ö
RO Uni P
1.51 Power-up keypad reference
Ú
0 ~ 2
Ö
0 RW Uni Txt