Spider DSA User’s Manual
101
Figure 54. Data Plugin
System Configuration
A system consists of one or more front-end modules that operate together. To
run as a controller system, at least one of the modules must be a Spider-81 or
Spider-80x, but the others can be any compatible front-end module. Additional
modules add input channels to the system up to 24 modules with 192 channels.
When the system is composed of more than one module, only the input channels
on the master module can be set as trigger source.
A system is configured from the Spider System Configuration window accessed in
the Tools menu, Spider Configuration option.
To Next Page
Loading...