Spider DSA User’s Manual
85
Figure 35: Toolbar Setting
Menus in EDM Real-Time Mode
The available menus are Test, Setup, Control, View, Layout, Tools,
Report, and Help.
Test Menu
This menu is for creating, opening, saving, and configuring tests. A test is a
collection of configuration settings and acquired data. Each test operates in one
mode, such as Random Control, Swept Sine Control, or Dynamic Signal Analysis.
By default, EDM stores the test data, i.e. signals, in the Run Folder in ATFX
format. The measured data can be also saved to the internal flash memory in the
front-end hardware if the user chooses.
To Next Page
Loading...