Spider DSA User’s Manual
247
the right is the Test Control and status window. In the middle are the Signal
Display and Signal Setup tabs.
Recent Test List
Figure 157: Recent Tests List
On the upper left part of the screen, the Recent Tests list shows current and
previous tests. Each test is listed by its name and type (VCS or DSA). Each test
entry is expandable to display items underneath related to the test.
System lists the hardware modules associated with this test. The system is
set up with the Spider Config window, described under System
Configuration. The name of the system is displayed in parentheses.
Signal List
The Signal List shows live signals and saved data available for display.
Figure 158: Signal List
To Next Page
Loading...