Spider DSA User’s Manual
280
System lists the hardware modules associated with this test. The system is
set up using the Spider Config window, described under System
Configuration. The name of the system is displayed in parentheses.
Signal List
Under the Recent Tests list is the Signal List, which shows live signals and saved
data available for display.
Figure 190: Live Signals
Live Signals include all input channels that are a part of the current system.
(Depending on the test type, there may be other signals such as the control
profile, associated alarm, and abort lines.) The list is divided in categories for time
streams, RPM Signals and Order Tracking Spectra. It can also be viewed
according to the hardware modules by right-clicking on the list and selecting Sort
Signals by Spider Modules.
Run Folders tab displays the recent Runs:
After the user presses the Run button and the test finishes, a “run” is generated.
By default, a Run folder is created on the disk.
To Next Page
Loading...