Spider DSA User’s Manual
164
Event Action Rules Setup
Figure 111: Event Action Rule Setup
The Event-Action Rules tab in the Test Configuration window defines the actions
that will occur in response to test events. User-defined events can also be
customized. The list box on top lists all the events and their actions. System events
are blue, and user defined events are green. When an event is selected, its
associated actions are listed below. Use the buttons on the top of the lower list to
add or remove actions, to rename user events and to save changes.
Reports
EDM can generate customizable reports in Microsoft Word format that
summarize the test setup and results (Microsoft Word 2003 or later is required
for this feature). Reports are generated from templates, which define the
formatting and what data is to be included.
To define a new template: select (Define Template) in the Report menu.
To Next Page
Loading...