Spider DSA User’s Manual
87
Pin Test will show this test in the test pane until it is unpinned.
Export Run Folder will export all signals from the current run folder to a
directory.
Open Data File will let the user browse from the disk and open a data file.
Check List opens the summary of critical parameters for review. This dialog box
can be prompted before each test if the user so chooses.
Run History opens a dialog box to show recent runs in various categories. It is
the best way to look at prior tests in chronological order.
Import LDS Project allows users to upload an LDS test project to the current
EDM test. (See the Import LDS Project section for details)
Account Logout will let the user log out from his/her current account.
Exit EDM will exit the software. If a test is still in progress, the software will ask
the user to stop the test first then exit. When EDM exits, all changes to all of the
tests will be automatically saved.
Setup Menu
This menu is used to setup all test related parameters such as channel tables,
test configurations, and black-box mode.
Figure 37: Setup Tab
Test Configuration opens a tabbed dialog box and allows the user to set all the
testing parameters.
Engineering Units allows the user to setup the EU as global parameters, or just
for the current opened test.
Input Channels opens the channel setup dialog box.
To Next Page
Loading...