Spider DSA User’s Manual
89
Figure 39: Control Tab
View Menu
The View Menu is used to add display windows. Display Windows are windows
for displaying data under the Signal Display tab(s) in the main EDM window. This
data can be from recorded files or real-time acquisition, in the time domain or
frequency domain. EDM provides a set of default windows for displaying the
standard data types such as time streams, blocks, and frequency spectra. Custom
window templates, with user-defined combinations of displayed signals, can be
defined using the Save Active Window as User Defined command. These
custom templates will be listed in the bottom of this menu.
Figure 40:View Tab
Layout Menu
The Layout menu has commands for opening and closing signal display tabs. The
tabs, with their current layout, can also be saved and opened. Each of these tabs
To Next Page
Loading...