Spider DSA User’s Manual
279
Once the test is created, a blank test with no signals can be viewed. The following
Figure shows the basic User Interface when the test is created.
Figure 188: Order Tracking Test – Initial EDM Screen
The Test screen is divided into 5 parts. On the left side, there are the Recent Test
List and the Signal List. On the right, there are the Control Panel and the Status
Window. In the middle are the Signal Display and Signal Setup tabs.
Recent Test List
Figure 189: Recent Tests
On the upper left part of the screen, the Recent Tests list shows current and
previous tests. Each test is listed by its name and type (VCS or DSA). Each test
entry is expandable to display items underneath related to the test.
To Next Page
Loading...