Spider DSA User’s Manual
408
4. To access the Spider-HUB configuration page via a web browser, open a web
browser and enter 192.168.1.110 in the address field. The default username is
‘admin’ Leave the password blank. The picture below shows the Spider-HUB
verification window.
5. The Spider-HUB configuration web service is provided by VITESSE. Follow the online
guidance to set up the Spider-HUB.
Spider HUB PTP Clock Configuration
This step is required in order to enable the IEEE 1588 PTP service.
1. Access the Spider-HUB configuration page.
To Next Page
Loading...