Spider DSA User’s Manual
355
Alarm Status
There are several built-in features within the EDM – RCM to monitor the status
of Tests, Alarms or Recordings. Project Status shows the Spider systems that have
triggered an alarm by highlighting the tests according to the set thresholds.
The active Alarm status within the Project Status window shows the number of
time the alarm was tripped since a user’s most recent check. To get a more insight
on the alarms, A detailed view of the alarms can be viewed on the Alarm Status
window. This window is specific for each test and the details for the active test are
displayed in this window.
An overview of the alarm status for active Spider module is also available in the
control panel.
This enables a quick glance of the events occurring on the remote Spider.
To Next Page
Loading...